Sennheiser mic input trafo TM003 specification needed.thanks

shop deals on amazon
Shop deals on ebay
Advertise with us
GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
andre tchmil

andre tchmil

Well-known member
Joined
Jun 4, 2004
Messages
1,654
Location
land of chicon
got some old input trannie here, cylinder shaped , 2 pairs of wires ( red/ blue , must be output and green/ grey, must be input)
has the sennheiser "s" logo on it and the numbers TM 003, and (I guess the serial number) Bv 1.1 27 9.

anyone can help me out on this
 
Hi Andre,

The Sennheiser TM-003 is a 1:15 or 1:30 ratio transformer,
(1:30 = half primary winding)
Primary 200 ohm with centre tap: gray - yellow/CT - green
Secondary oprox. 45 k: red - blue (secondary recomend load is 500 kohm)

--Bo
 
thanks for the info Bo.

Can you explain the center tap thing 1:30 or 1:15 ratio.
Mine has only 4 leads, 2 for input and 2 for output.

green/ gray on input , and red /blue on the output.
can I use this trafo on your DIY DI box for instance ?
 

Similar threads

TheGuitarist
Footswitch surrounds/other cool stuff i could put on a pedalboard.
Replies
7
Views
2K
kepeb
kepeb
M
Neumann U47 short body restoration
Replies
15
Views
11K
dissonantstring
dissonantstring
gar381
gar1731 build thread
4 5 6
Replies
106
Views
39K
wjohn
W
gar381
gar2520 build thread
16 17 18
Replies
346
Views
111K
thomasdf
thomasdf

Latest posts

Back
Top