News:

Smart Search:  If you're...
-not in a board, it will search the entire forum.
-in a board, it will search just that board.
-viewing a topic, it searches within that topic.


Likes 27 Likes

gyraf

    Aarhus, Denmark
The official G9 help thread
« on: September 07, 2006, 02:05:43 AM »
This will be The official G9 help thread - there's too many loose threads out there.

Jakob E.
..note to self: don't let Harman run your company..


ChrioN

    Gothenburg, Earth
The official G9 help thread
« Reply #1 on: September 07, 2006, 08:32:33 AM »
at last

I'll be back  :oops:
In need of inductors? Check out my winding shop in the white market!

Kev

    Melbourne, Australia
The official G9 help thread
« Reply #2 on: September 07, 2006, 05:05:28 PM »
yep
good one
 :thumb:

strange how no-one prompted that earlier ?
Kev
DIY Factory

tony dB

    Belgium
The official G9 help thread
« Reply #3 on: September 07, 2006, 05:29:11 PM »
Big up for Jakob!  :thumb:

gregcs1

The official G9 help thread
« Reply #4 on: September 12, 2006, 05:58:58 PM »
No one is working on G9?

tony dB

    Belgium
The official G9 help thread
« Reply #5 on: September 12, 2006, 06:04:39 PM »
no, they just don't need help, that's all  :green:

matta

    Cape Town, South Africa
The official G9 help thread
« Reply #6 on: September 12, 2006, 06:05:28 PM »
HV scares people :shock:

Hah hah! I actaully am working on one, slowly, only cause I can't afford all the parts at once ;-) I'm sure in time the questions will come.

Cheers

Matt
Matt Allison
www.matt-allison.com

Quote
We are not going to start thinking of ways to get an octopus to commit a crime, cause that just has failure written all over it – Earl J Hickey

enthalpystudios

    kent, oh
The official G9 help thread
« Reply #7 on: September 12, 2006, 07:46:42 PM »
i have all the resistors stuffed ;]

and diodes.

pcb sockets on mine wont fit.  and i need to reorder all the solen's i ordered from AES, because ups shipped my order back to them without telling me.  lost out on the cheap 12av7's too!

i got pcb sockets from apexjr for a really great price....  they may actually fit at some point, its only the center post thats having a tough time fitting.  i have drills for things like that

billy

gyraf

    Aarhus, Denmark
The official G9 help thread
« Reply #8 on: September 13, 2006, 02:53:04 AM »
..the center post on tube sockets can usually be cut off - just don't cut too close to the joint, as this sometimes also holds the socket together..

Jakob E.
..note to self: don't let Harman run your company..

enthalpystudios

    kent, oh
The official G9 help thread
« Reply #9 on: September 13, 2006, 05:37:55 AM »
oh cool i'll try that out tomorrow.

right now its 5:33 am and i just spent an hour finding a prob on my (OT) gssl board...   the 100r output (load balancing?) resistors at the very very output had a solder bridge.  and that doesnt work well

thanks again jakob


tony dB

    Belgium
The official G9 help thread
« Reply #10 on: September 13, 2006, 05:44:25 AM »
well, I will try to get my chest wet. Having a few close to complete stuffed G9-boards lying around, this thread will be of use when I try to get them working...

rotation

    slovenia
The official G9 help thread
« Reply #11 on: September 13, 2006, 09:20:34 AM »
Hi!
I-m happy to see this. Another very helpful thing would be adding BOM for Americans and Europeans, because they are all around the forum and are difficult to find. So post them please.
Miha

tony dB

    Belgium
The official G9 help thread
« Reply #12 on: September 13, 2006, 09:47:14 AM »
I think I found what I needed in the META, isn't it there? This thread is about debugging/roundup of the G9

analogical

    Maryland, USA
g9 project help
« Reply #13 on: September 20, 2006, 10:27:02 PM »
Howdy all. This is my second diy build and my largest to date, I want to thank all the people here for being so nice and guiding me into the uncharted waters of the g9.  I hope you all won't mind answering some boneheaded questions over the next few weeks as I try to build this up to a working pre. I'll post pictures of my progress outside of this meta once i feel I have something worth showing off.  :)  

And an extra thank you to Jacob for releasing this pre's design into the public domain!

Cheers,
Don

analogical

    Maryland, USA
G9 R38 location?
« Reply #14 on: September 21, 2006, 08:14:07 PM »
I have a question about a resistor R38 which is supposed to protect the T1. I can't find it on the board!?! Am I blind?

tony dB

    Belgium
The official G9 help thread
« Reply #15 on: September 22, 2006, 03:05:40 AM »
I've got your PM Analogical, I remember I was looking for that myself but since my pcb's are already stuffed since over a year now I don't recall where it sits. Jakob? on the schematic its in between T1 collector and R40/D12

gyraf

    Aarhus, Denmark
The official G9 help thread
« Reply #16 on: September 22, 2006, 04:54:13 AM »
R38 is a leftover from a previous revision.  :oops: sorry.

R39 is all we need here..

Parts list updated.

Jakob E.
..note to self: don't let Harman run your company..

tony dB

    Belgium
The official G9 help thread
« Reply #17 on: September 22, 2006, 04:55:15 AM »
no Jakob, na apologies necessary...
 sorry and  :oops:  to me, now I remember that it's this what you told me last year...  :oops:

analogical

    Maryland, USA
R38
« Reply #18 on: September 22, 2006, 05:55:52 PM »
Thanks Guys!

dinesh

    India
The official G9 help thread
« Reply #19 on: September 23, 2006, 01:21:43 AM »
Hi there,
I am collecting parts for my G9. Is that Toroidal Transformers are must for G9? or can i use normal PSU transformers?
Regards
Dinesh


 

Related Topics

Subject / Started by Last post
Last post February 28, 2006, 01:19:02 PM
by Rossi
Last post June 06, 2006, 11:12:51 AM
by Svart
Last post September 02, 2014, 05:12:37 AM
by AUDIO-ON
Last post September 18, 2014, 05:35:27 PM
by burglar
Last post November 22, 2009, 05:51:43 PM
by CJ