Twist Turner
Well-known member
Ok, I've been searching all day and I give up. I need the 6 pin screw in male connector for an AKG N61 power supply. On the schematic the part is listed as RWK-6_22c-1/4. I had some luck searching wk -622c but still couldn't find any more than the part existed. Should be made by Cannon, but this could possibly be an Amphenol part as well.
Anybody got any ideas??? I thought I might just swap out the female connector on the unit but it's just too tight in there, the current connector actually juts out beyond the unit to fit.
On a better note. I also spent 1/2 a day looking for the Cannon connector for the power cord on my Collins 212Y mic pre which I have never powered up. I got lucky and found it to be an Amphenol part. The part number (available from Digikey in the US) is MS3106A-14S-5P-ND. So if anyone is looking that might save you about a day of searching.
Anybody got any ideas??? I thought I might just swap out the female connector on the unit but it's just too tight in there, the current connector actually juts out beyond the unit to fit.
On a better note. I also spent 1/2 a day looking for the Cannon connector for the power cord on my Collins 212Y mic pre which I have never powered up. I got lucky and found it to be an Amphenol part. The part number (available from Digikey in the US) is MS3106A-14S-5P-ND. So if anyone is looking that might save you about a day of searching.