Eagle Libraries

Here are a couple of links to update the previously entitled "ClassicAPI" library, now called "Ed Anderson Transformers - v01".
I've also added a Haufe library called "Haufe Transformers - v01", which so far only contains the RK173 for anyone who is interested.

I also created a library with the entire available range of Vishay BC axial capacitors, which is probably also of interest called "etheory_capacitors". This one is a little bit messy and I'll clean it up soon enough.

I'll be updating and tweaking the haufe library over the next few nights, but the basic layout for the RK173 is correct, except for the drill sizes (I haven't measured them yet) and the centre screw hole, which I'll sort out and add soon.

These have been VERY carefully checked by me, and for the 2622 2623-4 I have also had boards printed and soldered to using those parts.
The rest please use at your own risk. Usual disclaimer, if you die opening these files, them I'm not responsible.

Enjoy!

www.evolutionarytheory.com/downloads/Eagle - just right click and download to get what you are after. You can't click to download as they end up getting read as text files.

Here is a link to the datasheet I used to make the Vishay BC caps library: http://www.vishay.com/docs/28325/021asm.pdf

And I found an even easier way to copy Eagle parts from one library to another!
http://www.lucadentella.it/en/2012/05/31/eagle-copiare-elementi-tra-librerie/?utm_source=rss&utm_medium=rss&utm_campaign=eagle-copiare-elementi-tra-librerie

I wish I'd known about this before ;-)

Any library for this?

http://bourneelectronics.com/Switch-Rotary-12-Position-90-Deg-PCB-Mount-P2867568.aspx

etheory said:

And I found an even easier way to copy Eagle parts from one library to another!
http://www.lucadentella.it/en/2012/05/31/eagle-copiare-elementi-tra-librerie/?utm_source=rss&utm_medium=rss&utm_campaign=eagle-copiare-elementi-tra-librerie

I wish I'd known about this before ;-)

Click to expand...

I don't understand. Isn't it the usual way of coying? That's how I've always been doing it , not knowing of any other way...

I think this example is not very accurate. It doesn't mention that the current library where you want to create the new device must be open first in the schematic editor page and that the donor library must be open in the configuration panel.
Most of the difficulties in Eagle are in these details.

anyone have CMOQ-2 or EA2503?

thanks

daveriot said:

anyone have CMOQ-2 or EA2503?

thanks

Click to expand...

Make your own, you don't realize how much inaccurate or inadequate those that are floating around are.