Hi guys,
Working on an MEQ-5, and was getting 6.5dB max low boost and 4.3 dB max high boost. Isn't this a little low? If so, what would be the easiest way to get them up to normal. The mid cut is working as expected BTW.
Thanks,
Craig
Working on an MEQ-5, and was getting 6.5dB max low boost and 4.3 dB max high boost. Isn't this a little low? If so, what would be the easiest way to get them up to normal. The mid cut is working as expected BTW.
Thanks,
Craig
