Schematics for Soundcraft Spirit Studio?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

emorysmith

Active member
Joined
Sep 23, 2006
Messages
26
Location
Memphis, TN
Got a problem with left monitor in the monitor/solo switching circuit.
The left LED meter is lit up all the way and there's DC present.
Any PFL/AFL switch causes a big pop and by turning the CRM
control, you can hear the effect of the DC in the monitor. The block
diagram shows an electronic switch and I wanted to have one on hand
before opening the board up. Although (hopefully) it's just the opamp
proceeding the switch.

Please PM me if you've got a PDF or scan, etc.

Thanks,
Emory :guinness:
 
After a little signal tracing I found it to be the opamp preceeding the switch.
I'd still like the service manual though.
Checked their site again. They only have the user guide.

E
 
Back
Top