Point to point tube preamp layouts. Help & tips needed

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Here is a snap shot out of an old Heath Kit manual.
No CAD programs back then.

Heath.jpg
 
Nice one. Super clean.



found this somewhere here by accident. Luckily the pictures were still up. Very crowded, but still neat.

http://cgi.ebay.com/INWARD-CONNECTIONS-VAC-RAC-10-CH-MIC-TUBE-PREAMPLIER_W0QQitemZ350080234449QQihZ022QQcategoryZ119018QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
 
Yep clean... For some reason the bay page screws my browser...

http://www.geofex.com/Article_Folders/pt-to-pt/pt-to-pt.htm

This is some basic no-nonsense stuff. May come in handy before you take some paper and pencil your layout down...
 
That's the best article on this topic I have ever read. Could not have been better dissected. I can already see what the biggest problem of my previous build was based on that.

Thanks a lot. I think I'm ready to start now.
 

Latest posts

Back
Top