lexicon PCM60 pops while engaging switches schematics uploaded

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pacemaker

Well-known member
Joined
Jun 8, 2006
Messages
585
Location
France
i need to restore a PCM60 wich make some pops
when engaging the switches,
and schematics or service manual would be really helpfull,
does anybody has them ,
regards,
francois
 
pacemaker said:
As the title says,
i need to restore a PCM60 wich make some pops
when engaging the switches,
and schematics or service manual would be really helpfull,
does anaybodu has them ,
regards,
francois

I have the schematics for the PCM60.

Email me: Mark [-aaattt-] sharktankpro [-ddddooottttt-] com and I'll send them your way.

Mark
 
Hi Guys,
still have problems with my PCM60,
i have measured 5 to 15mv  DC coming at the ouptut of the PCM60
wich causes the pops and clicks,
It is my understanding that a cap or a resistor, or both ,could help for such situation
However i'm not sure if it's best to put the cap at the switch or between audio output and ground,
Can somebody explain me ?
regards,
francois
 
Hi Guys, i tried a 1meg resistor between outputs and ground,
But it didn't removed the pops
any leads ?
 
I took a few time to scan and upload the schematics,
these are for rev 3.0 motherbard
http://img207.imageshack.us/g/timingandcontrol.jpg/
 

Latest posts

Back
Top