Author Topic: Collective Cases - PSU cases, ez1073, PYE and many more in stock  (Read 61127 times)

Brolik

  • Member
  • Posts: 309
  • Philladelphia PA
    • Brolik Productions
Re: Collective Cases - 5.5" depths now avaliable in 2U and 3U
« Reply #280 on: May 07, 2012, 02:18:09 PM »
Nice. Good news. Slap me on that list if you've got one.


dandeurloo

  • Member
  • Posts: 1050
  • Minneapolis, MN
    • http://www.collectivecases.com
Re: Collective Cases - EXTERNAL & TUBE PSU Cases
« Reply #281 on: June 08, 2012, 12:44:02 PM »
Inside dimensions: 4.75" wide, 4" tall and 8.25" long. 

Tube Mic PSU (XLR version)


Back Side (XLR version)


Tube Mic PSU (Binder version - Binder part # 09 0044 00 07)
I also have a version with one Binder connector cut out and one XLR.  That one is currently on my bench getting fitted with the PSU for my Iaudio Mic!  I'll upload photos when I get that completed.

External PSU (switch side)


External PSU (IEC & XLR out side)


More pics to come & Prices. 
« Last Edit: September 25, 2012, 10:47:57 AM by dandeurloo »
PROFESSIONAL CHASSIS AND FRONT PANELS FOR DIY PROJECTS: WWW.COLLECTIVECASES.COM

Dan Deurloo
www.collectivecases.com
www.risendrums.com

funkymonksf

  • Member
  • Posts: 273
  • Seattle, WA
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #282 on: June 11, 2012, 02:53:17 PM »
I want!!

glimmertwins

  • Member
  • Posts: 19
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #283 on: June 11, 2012, 04:26:22 PM »
Ya, I'm also liking what I see. 

dmp

  • Member
  • Posts: 1485
  • Madison, WI
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #284 on: July 02, 2012, 12:54:17 PM »
Hey Dan,
I'm almost done with a tube preamp using your 5.5" deep cases. Really nice cases!
For the next run of them, would it be possible to align the in / out xlr punches vertically to free up a little more space on the back panel? With transformers and tubes the more room the better.
Do you have the deep 1U stereo cases in stock? I need a pair.
Dan

okgb

  • Member
  • Posts: 5162
  • Winnipeg Mb Canada
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #285 on: July 02, 2012, 02:19:13 PM »
Was looking but I'd really like to see pix , Also need general psu case to fit the 51x psu
Edit , I see there are image  , representations on the site , I'll check dimensions for the 51x supply
« Last Edit: July 03, 2012, 07:22:06 AM by okgb »
GKB Audio / Greg Boboski

dissonantstring

  • Member
  • Posts: 1053
  • san jose, ca.
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #286 on: July 02, 2012, 03:00:28 PM »
hi dan,
the tube mic psu cases look great!  i know i'll be getting one.  will you silk screening the part holes (eg. mic in, mic out, pattern, etc)? i guess the pattern isn't always omni, fig.8 and cardiod (as in the U47) though, but the rest of the parts are pretty standard and would be nice to have them screened.  just a suggestion.   ;D
BTW, what are the dims on the case?
best,
grant

kpearsall

  • Member
  • Posts: 209
  • wisconsin USA
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #287 on: July 20, 2012, 01:14:37 AM »
Dan, what are the prices for the Tube Mic PSU and for the External PSU?

HMPS

  • Member
  • Posts: 75
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #288 on: July 22, 2012, 02:31:59 PM »
do you have the fairchild 670 cases in?

Sylvain D.

  • Member
  • Posts: 143
  • Canada
    • The Transfer Room
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #289 on: July 23, 2012, 03:35:06 PM »
Hi Dan,

 I 'd be interested in a 3U front (and maybe case) for Sontec stepped mastering version. I think I saw a couple other people looking for same.

Any thoughts...?

Syl


sr1200

  • Member
  • Posts: 1645
  • Long Island, NY USA
    • MEI Records
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #290 on: July 24, 2012, 06:32:03 PM »
placed an order last week for a send n blend case, any updates?
MEI Studio - Long Island, NY: http://www.meirecords.com

dandeurloo

  • Member
  • Posts: 1050
  • Minneapolis, MN
    • http://www.collectivecases.com
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #291 on: July 24, 2012, 10:59:18 PM »
Yeah, I have a bunch of steel at paint.  Hoping it comes in this week.  Thought it I might have seen it today but no luck.  Once it gets back I can ship a bunch of stuff!


I'll hit you up with a shipping invoice once I get my metal back.  Thanks
PROFESSIONAL CHASSIS AND FRONT PANELS FOR DIY PROJECTS: WWW.COLLECTIVECASES.COM

Dan Deurloo
www.collectivecases.com
www.risendrums.com

analogstud

  • Member
  • Posts: 29
  • Michigan USA
  • American Recording Workshop
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #292 on: July 26, 2012, 11:57:03 AM »
Hey Dan
        Just about finished with the D-LA-2A (with your case). Looks pretty slick ;). Will be starting a 4-channel EZ1290 (Martin's boards) soon and was just checking to see if you had any of your 4-channel EZ1290's in stock?

Gotta slow down! This stuff is addicting :o!

Thanks, Dave.

PeterL

  • Member
  • Posts: 25
  • Washington DC
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #293 on: August 02, 2012, 12:06:09 AM »
Hey Dan, just wanted to see if you have any Sta-Level cases in stock available.

dandeurloo

  • Member
  • Posts: 1050
  • Minneapolis, MN
    • http://www.collectivecases.com
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #294 on: August 03, 2012, 10:46:50 AM »
Painter said he has finished my metal so hopefully I can ship cases this weekend.  Also, a number of things will be in stock then as well. 

Thanks
PROFESSIONAL CHASSIS AND FRONT PANELS FOR DIY PROJECTS: WWW.COLLECTIVECASES.COM

Dan Deurloo
www.collectivecases.com
www.risendrums.com

duantro

  • Member
  • Posts: 276
  • KCMO USA
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #295 on: August 03, 2012, 07:59:26 PM »
Received the mic psu case yesterday and I must say, it was worth the wait. This thing looks great! This weekend is c12 psu build time!
Thanks Dan!

funkymonksf

  • Member
  • Posts: 273
  • Seattle, WA
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #296 on: August 04, 2012, 02:36:04 PM »
I'm trying to fit a dual ez1290 in a 1u case, however I need at least 37mm of internal height clearance for the output transformer. What is the clearance for your 1u cases?

Thank you,
Brice

funkymonksf

  • Member
  • Posts: 273
  • Seattle, WA
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #297 on: August 25, 2012, 02:15:19 PM »
I'm really impressed with my case Dan! So long to par-metal...

Thank you,
Brice

kpearsall

  • Member
  • Posts: 209
  • wisconsin USA
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #298 on: August 31, 2012, 10:10:42 PM »
Forgot to post here sorry. PM'd you to order Tube Mic PSU. Not sure if you got it?

kpearsall

  • Member
  • Posts: 209
  • wisconsin USA
Re: Collective Cases - new PSU cases and 5.5" and 14" cases
« Reply #299 on: September 07, 2012, 12:57:01 AM »
Received the tube mic PSU today and just wanted to share how impressed I am with it! Very good build quality and a great price. Going to look very nice with my u67 :)

One question though. Do you have a recommendation for the rubber feet?