BV8 winding instructions anywhere around here?

Hi,
searching for BV8 transformer winding instructions. I would really appreciate if someone could help me.
Thx a lot
regards
Bernd

You can find something here http://vintagewindings.com/products/TransDesign3.html, but if you want all the information you have to buy the ebook.

Fra

Here : http://www.infernalemachine.fr/TECH/NEUMANN/U47Tranny_Winding.pdf

Best, Matteo

Thanks a lot, Matteo! That was very helpful!
regards
Bernd

Very nice! Thanks!

Jakob E.

Hi Teo, Thanks for sharing that!

Does anyone know what the 'CuL' means on the winding sheet? I guess it is just the wire guage in mm. Copper something?

Lötbar translates as 'solderable'.

Stewart

CuL= copper wire with lacquer

regards
Bernd

Thanks Matteo!
Does somebody knows where to get bobbin like the original written in this document: Polystyrene E I 30/12/4?

Fra

Does anyone have info on the BV11 (M49) and BV12 (u67)?
Also, were these made by Neumann or is it just a specification by them that was sourced from other companies? What is the significance of "BV", since Beyer also used this designation for Transformer part numbers?

Hello,
I was looking for the Bv8  Blueprints, Windingpattern  and the Link above is dead, so i thought  it could be usefull to share my Search.
http://www.files.com/set/516ddfa1b63dd
PDF Files.
Lothar

Edit,  corrected the Link.

tubestation said:

Hello,
I was looking for the Bv8  Blueprints, Windingpattern  and the Link above is dead, so i thought  it could be usefull to share my Search.

http://www.files.com/download/516ddfa16d4f7/U47Tranny_Winding.pdf

Lothar

Click to expand...

This link doesn't work either.
Best,
Bruno2000

Sorry,
It worked for me , i hope this Link works. You find PDF Files . Also BV8  Lamination Information in another PDF
http://www.files.com/set/516ddfa1b63dd
Lothar

Ask and you shall receive.

Remove '.jpg'

Mark

tubestation said:

Sorry,
It worked for me , i hope this Link works. You find PDF Files . Also BV8  Lamination Information in another PDF
http://www.files.com/set/516ddfa1b63dd
Lothar

Click to expand...

That worked for me.  Thank you!
Best,
Bruno2000