KSeaton
Member
Hi all,
First post here those been a long time lurker.
I built my first 1176 Rev A from a Hairball AUdio Kit. Passes audio fine and had a tech calibrate it for me and it came back to me with these symptoms:
Input is EXTREMELY sensitive. With barely any signal coming in it starts to clip
It sounds as if there is a dramatic high pass filter on the signal.
When switching between metering modes the output signal changes level a bit
Turning the release control clockwise seems to raise the overall signal level
Don't get expected result with all buttons in (no VU pinning)
Not really sure where to start troubleshooting on this one and with time being at a premium currently, any help or suggestions on where to start would be much appreciated
- Kevin
First post here those been a long time lurker.
I built my first 1176 Rev A from a Hairball AUdio Kit. Passes audio fine and had a tech calibrate it for me and it came back to me with these symptoms:
Input is EXTREMELY sensitive. With barely any signal coming in it starts to clip
It sounds as if there is a dramatic high pass filter on the signal.
When switching between metering modes the output signal changes level a bit
Turning the release control clockwise seems to raise the overall signal level
Don't get expected result with all buttons in (no VU pinning)
Not really sure where to start troubleshooting on this one and with time being at a premium currently, any help or suggestions on where to start would be much appreciated
- Kevin
