Building the Jensen AS016 Microphone Preamp Front End

straypacket · Mar 13, 2015

I have uploaded the new PCB to OSHPark, with pads resized for Mountain switch part #108-2MD1T2B2M6QE-EVX.

The board can be seen / purchased from the same link as in the previous posting.

I have a zip of the new gerbers for Rocinante, but the site isn't letting me attach a zip file (?really?). So Rocinante, PM me with your email and I'll get the gerbers to you.

I will post again with the Eagle files.

straypacket · Mar 13, 2015

Another update:

Here is a Mouser cart for 2 channels:
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c55691f6f1

I have attached the Eagle BRD file (version 1.8.1).

Rocinante · Mar 14, 2015

Thank you man. This is a really useful contribution.

Rocinante · Mar 28, 2015

Stray,
So how important is the resistor accuracy other than the matched 6k81's which I remember should be pretty accurate. For instance I have 620r can I use that instead of 619r?

straypacket · Mar 28, 2015

Not sure - I tend to get 1% resistors and call it close enough in most cases. But then again, look at my signature

Building the Jensen AS016 Microphone Preamp Front End

Help Support GroupDIY Audio Forum:

straypacket

Well-known member

straypacket

Well-known member

Attachments

Rocinante

Well-known member

Rocinante

Well-known member

straypacket

Well-known member

Similar threads

Latest posts

Building the Jensen AS016 Microphone Preamp Front End

Help Support GroupDIY Audio Forum:

straypacket

Well-known member

straypacket

Well-known member

Attachments

Rocinante

Well-known member

Rocinante

Well-known member

straypacket

Well-known member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!