looking for a brainstormer and Tech , preferable in EU . large stock of trafo's

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
jensenmann said:
NTL1
Neutrik seems to have a quality problem with these. I´ve had even new ones, purchased from a dealer, arrive dead several times.

I repaired a NTM4. The winding's start and finish are soldered directly to the PCB pins and the high-Z side is very thin and fragile wire which can break with little tension as was the case with this one.
 
Back
Top