Alctron HST11a thread size for screws

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

baadc0de

Well-known member
Joined
Jul 9, 2009
Messages
797
Location
Europe
Hi,

it seems I've lost the original screws on an Alctron HST11a body. Do you guys know which thread size (and either metric/imperial) they are? I'm looking for the ones that mount the headbasket to the round plate that separates the amp and capsule assembly and (I think they are the same) the ones that mount the round plate to the internal rails.

Much appreciated
B
 
IIRC I beleive those are 2mm thread

Best,
dAN,
 
The SYT-5 bodies use M2's to secure the headbasket and the pcb for the switches and I'm sure I have interchanged screws between the two bodies.

2mm screws are cheap on ebay worth having around I'm always loosing them.haha

Cheers,
Ben
 
M2. . . The holes can be re-tapped to 2-56 easily if the M2 threads strip.

McMaster Carr sells a wide selection of screws at reasonable quantities in the US.
 
Back
Top