hoodun
Active member
- Joined
- Sep 17, 2014
- Messages
- 41
I received two Carnhill VTB2281 trafos that I plan on wiring to a couple PM1000 modules.
Problem is I do not have the pinouts or equipmetn knowledge to figure them out. Carnhill site is useless. Asking anyone just gets snide remarks such as you shouldn't be wiring them if you dont know kinda thing. :-X
I have racked many Langevin modules and Guitar amp output trafos and I always had a diagram of the primary, secondary, and center tap wirings.
If anyone can help me get these Carnhills installed it will be much appreciated. There is an out from the PM1000 and from there I will be going to an xlr out. Should be pretty simple...
Problem is I do not have the pinouts or equipmetn knowledge to figure them out. Carnhill site is useless. Asking anyone just gets snide remarks such as you shouldn't be wiring them if you dont know kinda thing. :-X
I have racked many Langevin modules and Guitar amp output trafos and I always had a diagram of the primary, secondary, and center tap wirings.
If anyone can help me get these Carnhills installed it will be much appreciated. There is an out from the PM1000 and from there I will be going to an xlr out. Should be pretty simple...