Hello Everyone,
I chose to go with Sowter - the 1009 and 1010 for the ptp build. Has anyone purchased the 1009f and the 1010a and can offer a simple wiring guide. I have the whole chassis wired up and just have the I/o sowters to wire up.
What I can read thus far is - correct me if I have this incorrect.
Primary Side
Red - Pin 3 XLR
White - GND
Blue - PIn 2
Black -GND
Secondary
Green - Between R5 & R6
Grey - GND
the 1010
Primary
Red - C5
Yellow - GND
Black - GND
Secondary
Grey - Pin 3 XLR
White - R23 Pin 2 XLR
Can anyone provide any feedback if I have this figured out correctly?
Thanks!!!!
I chose to go with Sowter - the 1009 and 1010 for the ptp build. Has anyone purchased the 1009f and the 1010a and can offer a simple wiring guide. I have the whole chassis wired up and just have the I/o sowters to wire up.
What I can read thus far is - correct me if I have this incorrect.
Primary Side
Red - Pin 3 XLR
White - GND
Blue - PIn 2
Black -GND
Secondary
Green - Between R5 & R6
Grey - GND
the 1010
Primary
Red - C5
Yellow - GND
Black - GND
Secondary
Grey - Pin 3 XLR
White - R23 Pin 2 XLR
Can anyone provide any feedback if I have this figured out correctly?
Thanks!!!!