Hello everyone,
I am looking for advice on my builds. I have built 2 1176 Rev D. I have checked the voltages against the schematic, continuity and double checked values. R 59 does not show movement on the meter at output. All the voltages are correct for Q4 Q5 Q6.
I decided to go with 2n5088 instead of the 2n3707/3708 Transistors.
Voltage @ output XLR is .041
Q11 G - 2.774
S - 2.158
D - 2.481
Q 12 C - 2.935
B - 3.591
E - 2.913
Q 13 C - 3.799
B - 0.925
E - 2.675
These values are very low with reference to the schematic except for Q13 Base.
I am presuming it could be a bad transistor in Q11?
I am looking for advice on my builds. I have built 2 1176 Rev D. I have checked the voltages against the schematic, continuity and double checked values. R 59 does not show movement on the meter at output. All the voltages are correct for Q4 Q5 Q6.
I decided to go with 2n5088 instead of the 2n3707/3708 Transistors.
Voltage @ output XLR is .041
Q11 G - 2.774
S - 2.158
D - 2.481
Q 12 C - 2.935
B - 3.591
E - 2.913
Q 13 C - 3.799
B - 0.925
E - 2.675
These values are very low with reference to the schematic except for Q13 Base.
I am presuming it could be a bad transistor in Q11?