Behringer Ultragain Mic2000

Shop deals on ebay
Advertise with us
shop deals on amazon
GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Siegfried Meier

Siegfried Meier

Well-known member
Joined
Jul 2, 2004
Messages
1,606
Location
Ontario, Canada
Hey guys,

I have one of these stereo mic preamps from the 90's and it's actually quite good.  On the board there's empty sections for input audio transformers.  Does anyone know what was supposed to go here?  Does anyone know what can fit here that's in current availability?

Thanks!
Sig
 
On the Behringer MIC2000 pcb´s there is NO empty space for INPUT transformers.

The empty space is for the OUTPUT transformers (OT-1) which can be found in every Behringer (active) DI-Box.

 
Ahhhh yes!  Sorry it was the output trafos.  It's been a few years since I had that thing open.

Anything else out there that can be wired in place instead of those OT-1's?
 
Which transformer do you have ?

The OT-1 is a 600 Ohm line level transformer which fits directly into the pcb.  I think every other transformer will not fit directly and has to be wired.
 
I don't have any transformers at this point in time lined up, but was just hoping for something cool.  I don't mind if I have to put flying leads and make it fit.  Will anything 600 ohm work here?

Thanks,
Sig
 

Similar threads

pucho812
Dbx 160S schematic request
Replies
4
Views
270
pucho812
pucho812
N
Toft ATB power supply connectors
Replies
11
Views
610
Tubetec
T
N
Tape heads on a Dynacord Super62
Replies
1
Views
197
cyrano
cyrano
N
RCF EVOX class D output issue
Replies
2
Views
308
NoisyIndividual
N
S
Need ideas for a mixing console enclosure
2 3
Replies
44
Views
3K
blue_luke
B

Latest posts

Back
Top