Cable for AKG C24

Advertise with us
shop deals on amazon
Shop deals on ebay
GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
G

geebeeVIE

Member
Joined
Jan 23, 2015
Messages
22
Hi Folks,

After having built 3 of Matachungs C12, I got hold of an original C24.  Unfortunately, it comes  with connector but without cable.
According to the schematics, I would need a 9wire  cable + screen. My standard choices that would fit the connectors all have only 8 wires; any ideas what would be a suitable solution?

Thanks

Georg
 
You can find what you need from Belden, but you'd have to buy a 100ft roll so it won't be cheap.

For the right diameter (6-6.5mm?) and braid shielding you'll want something like this:
 

Attachments

  • 9614-060100-Belden.pdf
    94.7 KB · Views: 9
Hi Folks,

I just found the perfect cable for the task.
It's made by Leoni germany, and is a 5 pair Multicore that fits the connectors with only 7,9mm Diameter.
For heater current, I can use one pair and therefore increase conductor cross section.

http://www.leoni-multimedia.com/Produkte-Loesungen.7530.0.html?&mode=DETAILS&cpid=10960&uid=1016&cHash=9795d4b239fce5b3619a88c3013c5188

Thanks,

Georg

 

Similar threads

MicMaven
What Shall I Do?
Replies
4
Views
425
MicMaven
MicMaven
C12VR
new, more accurate Chinese C12 body!
2 3
Replies
56
Views
9K
RuudNL
RuudNL
O
Analog signal crosstalk in DB25 and ribbon cable?
Replies
7
Views
2K
Matt Syson
M
rock soderstrom
Mechanical decoupling of microphones and their capsules and tubes.
2
Replies
29
Views
2K
Cqwet Dbdfte
Cqwet Dbdfte
thor.zmt
Are there things that can be addressed in older circuits to modify them to deal better with the wireless routers and such?
Replies
8
Views
1K
thor.zmt
thor.zmt

Latest posts

Back
Top