GSSL CRC Board and grounding

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

anthorama

Member
Joined
Oct 26, 2015
Messages
7
Hi all,
Just wanted to share some graphs of my new GSSL build.
I added the CRC board, and then moved the main board grounds from the xlr in/outs to where the crc joins the main board.  Much better!!
Anthony :)
 

Attachments

  • ad8000 loopback 1k sine at -16.png
    ad8000 loopback 1k sine at -16.png
    100.6 KB · Views: 35
The previous post is my Apogee AD8000 graph.
Below is the stock GSSL.
 

Attachments

  • GSSL stock bypass 1k sine at -16 100avg.png
    GSSL stock bypass 1k sine at -16 100avg.png
    100.5 KB · Views: 35
...and finally, with the grounds moved.  Thanks!
 

Attachments

  • GSSL CRC relocate ground bypass 1k sine at -16.png
    GSSL CRC relocate ground bypass 1k sine at -16.png
    113.9 KB · Views: 29
Could you check what happens with no CRC board as a go-between and moving to ground to the power input?

Im curious, since adding the CRC board in itself didn't  seem to make a change, based on your data.

Gustav
 
Can you explain how you are grounding this? You simply removed the ground wires from the XLR in/out terminals and connected it to the 0V transformer connection?
 
critterkllr said:
Can you explain how you are grounding this? You simply removed the ground wires from the XLR in/out terminals and connected it to the 0V transformer connection?

yes please,
that would be nice and really helpful

thanks
 

Latest posts

Back
Top