mk47 b+ voltage jump ?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wolcott

Member
Joined
Jan 1, 2015
Messages
23
I have 2 mk47 mics , one has developed an intermittent crackling noise  that happens regardless of different tubes or capsules . My 1.5k drop resistor tests fine out of circuit .
My quiet mike is at 105 B+
My noisy mic is at 106.5 B+ same psu .
Ive cleaned the HI Z section Well . Ive been scouring the build thread for Ideas .
Any other thoughts ? :-\
 
wolcott said:
I have 2 mk47 mics , one has developed an intermittent crackling noise  that happens regardless of different tubes or capsules . My 1.5k drop resistor tests fine out of circuit .
My quiet mike is at 105 B+
My noisy mic is at 106.5 B+ same psu .
Ive cleaned the HI Z section Well . Ive been scouring the build thread for Ideas .
Any other thoughts ? :-\


What is the wattage of your 1.5K drop down resistor and is it aluminum heatsink or cast sand type?
 
Hey Guys , thanks for the replies .

The problem started with the original kit components , I then swapped out the
drop resistor for a larger sandbar type .

the mic that is quiet is still all original
 

Attachments

  • IMG_2206.JPG
    IMG_2206.JPG
    1.5 MB · Views: 15

Latest posts

Back
Top