Mendelt
Well-known member
I recently built a schematic from generalguitargadgets to drive an accutronics spring reverb. A friend of mine had a reverb-tank lying around so he wanted one too. But when I tried it out it sounded all distorted. It seems like his reverb-tank is a different version with an imput impedance of 8ohms and the tl082 opamps i used don't seem to happy driving this.
I looked on the accutronics site and came up with the following schematic
http://www.accutronicsreverb.com/drive1.pdf
But I was wondering what transistors i should use. The schematic says D40D8 and D41D8 for an 8ohm reverb but i can't find these anywhere.
I think that it should be possible to use this without the feedback-loop. My output-opamp allready has his own feedback-loop and the two transistors are connected as emitter-followers so they don't really need feedback right?
I looked on the accutronics site and came up with the following schematic
http://www.accutronicsreverb.com/drive1.pdf
But I was wondering what transistors i should use. The schematic says D40D8 and D41D8 for an 8ohm reverb but i can't find these anywhere.
I think that it should be possible to use this without the feedback-loop. My output-opamp allready has his own feedback-loop and the two transistors are connected as emitter-followers so they don't really need feedback right?