skal1
Well-known member
Need some help with this.
1}Ok their seems to be a resistor missing from the leg r11 witch is a 47k to pin 1 of v2 does any know what it is .
2}A wire is hanging of the 13 pin turret board , i have traced it back to pin 3 of the attenuator pot where does this go on the turret board
3}in this pic i can see a green where connected to the pin 2 of the turret board where does the other end connect. http://twin-x.com/groupdiy/displayimage.php?pos=-771
i do not know if this is a federal 864 thing but there is a lot of hum when the device is idling what would cause this also why when it releases to i here a hum.
any advice will be invaluable
thanks
skal1
1}Ok their seems to be a resistor missing from the leg r11 witch is a 47k to pin 1 of v2 does any know what it is .
2}A wire is hanging of the 13 pin turret board , i have traced it back to pin 3 of the attenuator pot where does this go on the turret board
3}in this pic i can see a green where connected to the pin 2 of the turret board where does the other end connect. http://twin-x.com/groupdiy/displayimage.php?pos=-771
i do not know if this is a federal 864 thing but there is a lot of hum when the device is idling what would cause this also why when it releases to i here a hum.
any advice will be invaluable
thanks
skal1