GasJunkie_Jabz
Well-known member
- Joined
- Apr 17, 2013
- Messages
- 86
Hi all,
I have a Greenlee rectangular hand punch that's perfect for IEC sockets that's for sale.
The specs are here:
GREENLEE 731R-1.018" X .861", 25.9mm x 21.9 mm Rectangular Chassis Punch Set
The size of the IEC I used with this punch is here:
http://www.mouser.com/ProductDetail/Qualtek/703W-00-08/?qs=258DH3jk4VdJ6ZTfPlRGrg%3D%3D&gclid=Cj0KEQjwzZe8BRDguN3cmOr4_dgBEiQAijjVFt1AdHxWcXKzz7M3P_WfcMPL7NNi7QivLJotMn5zSlgaAgA18P8HAQ
It's a wee bit smaller than the standard IEC, so a little bit of filing will do the trick.
Yours for 50 USD plus shipping
I have a Greenlee rectangular hand punch that's perfect for IEC sockets that's for sale.
The specs are here:
GREENLEE 731R-1.018" X .861", 25.9mm x 21.9 mm Rectangular Chassis Punch Set
The size of the IEC I used with this punch is here:
http://www.mouser.com/ProductDetail/Qualtek/703W-00-08/?qs=258DH3jk4VdJ6ZTfPlRGrg%3D%3D&gclid=Cj0KEQjwzZe8BRDguN3cmOr4_dgBEiQAijjVFt1AdHxWcXKzz7M3P_WfcMPL7NNi7QivLJotMn5zSlgaAgA18P8HAQ
It's a wee bit smaller than the standard IEC, so a little bit of filing will do the trick.
Yours for 50 USD plus shipping