Hi,
Tim at SCA hasn't been able to answer my latest post today. Since I have time to work today, I thought I'd post my stats here and see what you guys thought.
I have tried plugging in a SM57, but I have to crank the input and output to get any signal, and of course then it is loaded with hiss.
Her are my V reading at the 6 resistors:
Q1 C-3.9 B-2.4 E-1.9
Q2 C-12.6 B-3.9 E-3.2
Q3 C-21.9 B-12.6 E. 12.0
Q4 C-5.3 B-.9 E-.3
Q5 C-21.4 B-5.6 E-5.0
Q6 C-21.4 B-5.0 E 4.4
I'm not great with a scope, but here's a pic I generated with as close as I could get to recommended settings. No clipping as in pics in directions, but a notch in the upsplope of the wave.
http://www.angelfire.com/ky3/craigorris74/sine.jpg
Any suggestions are welcome.
Thanks,
Craig
Tim at SCA hasn't been able to answer my latest post today. Since I have time to work today, I thought I'd post my stats here and see what you guys thought.
I have tried plugging in a SM57, but I have to crank the input and output to get any signal, and of course then it is loaded with hiss.
Her are my V reading at the 6 resistors:
Q1 C-3.9 B-2.4 E-1.9
Q2 C-12.6 B-3.9 E-3.2
Q3 C-21.9 B-12.6 E. 12.0
Q4 C-5.3 B-.9 E-.3
Q5 C-21.4 B-5.6 E-5.0
Q6 C-21.4 B-5.0 E 4.4
I'm not great with a scope, but here's a pic I generated with as close as I could get to recommended settings. No clipping as in pics in directions, but a notch in the upsplope of the wave.
http://www.angelfire.com/ky3/craigorris74/sine.jpg
Any suggestions are welcome.
Thanks,
Craig