Testing diy 1073 - how to connect Signal generator to balanced xlr input

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wells2p

Well-known member
Joined
Mar 9, 2022
Messages
72
Testing my 1073 and while I’m able to connect my signal generator after the mic input transformer I would also like to test with it in front of it. What are my options for connecting a 2 conductor signal generator to a 3 pin balanced input?
 
Testing my 1073 and while I’m able to connect my signal generator after the mic input transformer I would also like to test with it in front of it. What are my options for connecting a 2 conductor signal generator to a 3 pin balanced input?

If you have a transformer just connect the hot leg to the center conductor on the generator, and the return leg on the shell of the generator.
 
Back
Top