Roachbeatz
Active member
- Joined
- Jun 22, 2020
- Messages
- 29
So I recently purchased a TLM 67 internal assembly. The body and capsule were used in an IOaudio u67 plug and play module. I purchased the internal assembly hoping to bring it back to life with a new k67 capsule. My issue is I am not sure where to wire the capsule to. The original capsule "plugs" into 7 pins, labeled 1 through 7. I am hoping that maybe one of you can help by telling me what each of the 7 pins correspond to. I plan to use the mic in cardioid only so I really just need to know which "pins" I would wire the capsule to. Unless of course there is a pcb kit available that I could wire in for the remaining switches for hi-pass, pad, and pattern direction. If so I would need to know what pins I would wire that to as well. If anyone could PLEASE help I would very much appreciate it.
**I am new to electronics so please keep answers straight forward and helpful. I realize most of you are very "seasoned" and that my questions may seem amateur or stupid so please have some patience with me.
**I am new to electronics so please keep answers straight forward and helpful. I realize most of you are very "seasoned" and that my questions may seem amateur or stupid so please have some patience with me.