GroupDIY

General Discussions => Drawing Board => Topic started by: Rogy on September 25, 2006, 08:20:02 AM

Title: Dynamic equalizer eg BSS DPR901 schematics?
Post by: Rogy on September 25, 2006, 08:20:02 AM

Hi all,


I'm wondering how the BSS DPR-901 (or equivalent) dynamic equalizer works.

Anyone has an idea? It uses VCA's and state variable filters, that's about all I know about it...


All hints or a schematic are very welcome!


Thanks,


Greetz,


Rogy

Title: Dynamic equalizer eg BSS DPR901 schematics?
Post by: SSLtech on September 25, 2006, 10:12:08 AM

Search...

Title: Dynamic equalizer eg BSS DPR901 schematics?
Post by: pucho812 on September 25, 2006, 10:41:24 AM

It's in the user manual which is a free download from BSS :thumb:

Title: Dynamic equalizer eg BSS DPR901 schematics?
Post by: Rogy on September 25, 2006, 12:03:12 PM

Looks like it would not be too complicated to turn the CAPS EQ circuit into a dynamic equalizer; replace each band's gain pot with two digital potmeters in series and a digital sidechain to set the amount and speed of compression/expansion per band.

Will have a closer look later...


Greetz,


Rogy

Title: Dynamic equalizer eg BSS DPR901 schematics?
Post by: kvintus on September 25, 2006, 01:04:49 PM

Quote from: "pucho812"

It's in the user manual which is a free download from BSS :thumb:

Didn't find it. Downloaded the manual but didn't see any schem. Didn't I look close enough, or?

/Anders

Title: Dynamic equalizer eg BSS DPR901 schematics?
Post by: pucho812 on September 25, 2006, 01:08:42 PM

Sorry miscommunication. there is no schemo but a nice block diagram which lays it all out as to how it works...