General Discussions => The Lab => Topic started by: charlie2012 on July 22, 2009, 05:57:54 PM

Title: Wiring Assign switch Please, Please help
Post by: charlie2012 on July 22, 2009, 05:57:54 PM

This is so easy so please don't laugh at my incompetence...

I am trying to wire up an assign switch for a passive summing mixer i'm building. It's a really simple thing for most here I am sure but it certainly fries my brain.

I've enclosed the schematic and a picture of the base of the actual switch I have - it shows the connectors on the switch labelled 1 through 12 around the edge and the 4 poles A, B, C and D in the centre.

Can somesome please explain how to wire up the switch to deliver the functionality of the schematic? Also, I am connecting the 4.3k resistors directly to the switch connectors so info on which pins of the switch to solder these would be great.

Thanks so much.

P.S. Many thanks to NYD for the mixer schematics.