Geat,
Two for me Volker.
I',m in Italy .
Let me know the total amount and your paypal.
PS: i've got an Europen VAT numebr so we can avoid VAT charges.
Let me know the total price for 2 to the UK - thats including 17.5% VAT and P&PHi Frank,
Will they work/fit in the G7?once I receive my ordered ST8456 to LL1538 adapter PCB they should fit in all projects using LL1538
If they do, im in for 1 or 2 for sure
Sorry If i missed it , but you like them better thanwell, I really like the price better than what I would have to pay for the LL1538 (http://www.canford.co.uk/Products/23-103_LUNDAHL-LL1538-TRANSFORMER-Analogue-audio-PCB-microphone-input)
the 1538 [ or xl version ]
generally speaking , how do they compare ?
2 jensamp 500 boards here;once the jensamp 51X is ready they will fit without adapters.
will these fit as input transformers without the adapter?
Paid...... and packed ;D
paypal'ed for 2 today.shipped - like all others
Hi Volker , are you planing to stock NTL1 (ie:169_500 project) ?? :) If yes , rough idea of the price??I guess I would need to have at least the same price Thomann has (cheaper than canford or farnell) ...
if more people are interested in NTL1 transformers post your interest, I would like to have an idea of the quantity.
Hey mister audio transformer...While you're at it : why not a pikatron or Lundhall feeler (AOC51X) ??
@ 42e (approx) , I'd like two!Thanks.+
I'd probably be in for a pair. They're hard to find in the US.it is not a huge quantity.
Paid :)packed :D
I even got some iron with my Gummibaerchen ;Ddon't mistake them ;D
Mr silent sir, any idea when the adapter boards for the Haufes will arrive? ;D
will reserve two for you.
which tube compressor PCBs do you want?
D-AOC: ordered and should arrive soon
D-LA2A: in stock
PM670: in stock
Mr silent sir, any idea when the adapter boards for the Haufes will arrive? ;Dyours is already packed and will go out tomorrow.
I am still looking for a extra PSU PCB for a PM660. did you have one available that don't disrupt the sets?sorry kaz, I thought I had ordered them, but looks like I didn't.
Got my haufe and a suprise PCB also. Thanks a lot Volker, greatly appreciated. Will get to work on my G7 asap ;Dmake sure no "adapter PCB pin" has contact to the Haufe metal case.
Money Sentalready shipped ;D
I´d like two Haufe ST8456, what is the price again? Thanks Volker.
Hi Volker;Hi B,
I'll take a D-la2a set of pcb if available.
Thx
B
HI VOLKER!!
PAYMENT DONE FOR ONE D-AOC
(ID 2GR26513RB622122L)
THANK YOU! :D
DINGO.
Volker,Hi Marc,
I'm interested in buying two D-LA2A PCBs if you still have a couple! I live in the USA.
Let me know payment options, etc.
Thanks!!
Marc Frieden
paypal to sales @ 51xAudio.com
best
Volker
hope my pack haven't went to the a post-officeyou should hold it in your hands soon, 22.09. has been your shipping date :)
I would like to request a total for one D-LA2A board to Hawaii 96734.
just wanna say I understand and applaud this decision, even if wikileaks actions aren't to everyone's taste ...for sure they are not to everyone's taste, it even is not 100% mine - but they don't release lies, only existing documents.
we can't have paypal (and amazon) deciding on world politics. This debacle shows that we might have given too much control to paypal already, shouldn't there at least be ONE alternative way for payments?I don't expect they decided, they have been forced by governments (not the market) to do this.
(Obviously I will keep paying Volker for his gummibears and pcbs as usual, in person and with marbles :P )always the better choice ;D
Just found out I was charged $40 foreign wire transfer fee...your decision, nothing wrong with it.
Won't be doing that again.
I don't expect they decided, they have been forced by governments (not the market) to do this.this should probably move to the brewery, but I am very worried about the decisions of corporations and blame them for their poor decisions in matters like this, because they are not elected by the people. There is a strong precedent in the USA to protect the freedom of the press (i.e. wikileaks) - while the person doing the leaking is not protected and can be prosecuted. When corporations have the power to make decisions about freedom of speech or press, it is not good.
(or have been afraid, I don't know)
Whoa... just saw the paypal issue. sorry did i make the cutoff? It seemed to go through okay.you are fine
I would like to buy two D-LA2A PCB's. How is now the procedure to do the order? I'm from Madrid, Spain.
Hi volker. Nice Haufe irons. I got some 255 laying around. Does these 310 beat mine?depends on the application ;D
Of cause. hehe. For the D-AOC?Hi volker. Nice Haufe irons. I got some 255 laying around. Does these 310 beat mine?depends on the application ;D
if the haufes fit as la2a input - i'll take two ;)
i would like to order 4 haufe ST8458 transformer,
shipped to france
will paypal be available again soon ?
I'm searching for a way to avoid PayPal completly!
sadly not an easy task.
PayPal might be impossible in the near future
like many (US) companies they deleted Wikileaks (either the servers or the DNS service)
if this is true I will not use PayPal "service" anymore, and delete my account
[this will delete this thread here too, since I can't donate to prodigy either without the account]
however, I'm not fine with internet war attacks against free speech
not sure if you know this ,
but french bank are charging a few euros for IBAN transfer,
like 3 or 4 euros
This Regulation is designed to put charges for cross-border payments in euros on the same footing as those for payments in that currency within a Member State.
I'm searching for a way to avoid PayPal completly!
sadly not an easy task.
however, if you are in France, just use IBAN / SWIFT EUR bank wire transfer.
no costs for you (& me), and you have the advantage of the 2% discount I will give you.
Pacemaker is right, i pay 3.5Euros for any Bank Transfer in most major Europe countrys, all the rest is a little bit more due to currency etc...
Any bypass relay boards left??sure. let me know your email and shipping address
paypal send for D la2a pcbs + power tranformer.already shipped :D
:)
Do you have any more D-LA2A pcbs left? I'm interested in 1
Hi Kevin,
yes, I have a few HWBP36 PCBs left.
let me know your shipping address, will ship six of them for free to compensate your poor man trouble ;D
HWBP36 component placement (http://www.groupdiy.com/index.php?topic=26585.msg325203#msg325203)
I'll PM you my address.packed. will ship tomorrow (holiday here today)
... I really like it.this is the most important part :) :) :)
Ooh, I hope 2 jensamp kits with transformers make it to december.. sadly won't be able to spring before that :/
do u know if the hauffe output transformers are the same as the Telefunken V672??they are the same like the V672 input transformer
i ask cause i have a few spare, nice sounding transformers.
Are you still selling the pm670 pcb kits? I would love to Purchase this project!!!!!!what I sell you can see in the first post :D
Please don't tell me you ran out of the Jensamp rev 02 (so non-51X) boards already?no problem with rev02 PCBs, or ST8456.
I'd like to buy 2 and 2 Haufe ST8456's.
Oh noes! And now that we have seen test numbers of the haufe's ... you'll have to get some more :PI will try, but tell me where :'(
I'd assume a *75 module input or output trafos wouldn't be ok, right? It would actually feel a bit weird to vandalize such a nice amp too... but maybe?If you have any V475-2 output iron save it 8)
since I have more "reservations" than stock for the Haufe 6L.5062.003.01-A001 please note:
I will deliver in payment order.
first in / first out.
No - I prefer bank transfer and keep track on this.since I have more "reservations" than stock for the Haufe 6L.5062.003.01-A001 please note:
I will deliver in payment order.
first in / first out.
I should have used paypal rather than doing a sluggish bank transfer... :'(
Has any one compared sound on the preamp between ASY26 and BC560 for Q2 ?like always no sound samples from me.
I think I read something somewhere but forgot where I saw it. Sound clips would work
if there are any available ....
What is current status for iron availability ?Haufe input available.
Can the Haufe input tx be used for the g9 with your haufe to lundahl adaptor?Yes Sir
I remember one package with accidently no bears,
let me know and I wil re-ship the important missing part!
added some of my PSU PCBs ;D
POSPSU PCB simple LM317 based PSU PCB (http://www.silentarts.de/DIY/PSUs/POSPSU-rev03-Top-grn.jpg)
EUR 5,00 each + shipping + 19% german VAT where applicable
POS48PSU PCB simple LM317 based PSU PCB with additional 48V (http://www.silentarts.de/DIY/PSUs/POS48PSU-rev01-Top-grn.jpg)
EUR 6,50 each + shipping + 19% german VAT where applicable
FP48PSU PCB simple LM317 based PSU PCB with additional 48V and 78XX based fixed voltage for relais etc (http://www.silentarts.de/DIY/PSUs/FP48PSU-rev02-Top-grn.jpg)
EUR 8,00 each + shipping + 19% german VAT where applicable
AC/DCmight be an option.
Hi, I haven't received my pair of jensamp kits yet, are they on their way? got a tracking number? thanks...Shipped 12.08.2011
Sendungsnummer: RT012004225DEso it arrived one day later at Frankfurt (airport) to go to australia.
Die Sendung wurde am 13.08.2011 im internationalen Logistikzentrum Frankfurt zur Weiterbeförderung nach Australien übergeben
Thanks for the update I'll let you know when it arrives.Argh, only a computer voice on the phone.
hello everybody.
anyone knows where to buy D la2a complet kit or PCB ?
thx
I'm new in the place :)
hey silent did you have BOM for D-la2a?and how much will cost full build for this project?Thanksmy private BOM is so old it wouldn't help (most parts with part numbers pre RoHS)
I have plans for this but not in the near future.Quote from: http://www.jlmaudio.com/shop/index.php?_a=viewProd&productId=11AC/DCmight be an option.
however, changing the LM317 to a LM337 will result in smoke.
if you have two separated secondaries for the FP48PSU / POSPSU it should work.
jensamp arrived today really cool looking project i'll need to order another me thinksfeel free to order a 2nd one :D
Boards and transformers have arrived! Thank you. Everything looks great! I just have a few questions about the FP48PSU. Should I use 1N4004 for ALL the diodes, or are there a few different ones? For the electrolytics I was thinking 50v for the 1000uf, 100v for the 100uf, and 63v for the 10uf. Finally, what should I use for the 2W in R2 & R4? Thanks and i'm sorry to even bother you with these questions in the first place. If any of the voltages for the lytics are off please let me know. Later.
I'm looking for 2 transformer LL1538, it's possible?I only sell Haufe ST8456, but with the adapter PCB they can be used as a substitute for any project with LL1538 footprints.
Can the Haufe ST8456 be used with a 1:2.5 ratio?sure, it is 1+1:5 8)
It's fantastic how quickly the post takes from such a distance!sadly this varies very much >:(
I would like to know if more haufe st8456 will be coming? I would need two at the moment.I ordered 50 more pieces two weeks ago.
Mail sending failed.you would be the first :)
What's available in output transformers? Price?see the first post: used LL1517 @ EUR 30 each
will there be more kits in the future?Jensamp-51X or in general?
will there be more kits in the future?Jensamp-51X or in general?
I let you know a secret: I hate packing component kits >:(
found two more used Haufe RK240, updated stock on post 1
Payment sent!
Cheers!
Quote from: Blackout on September 30, 2011, 03:33:03 pm
Boards and transformers have arrived! Thank you. Everything looks great! I just have a few questions about the FP48PSU. Should I use 1N4004 for ALL the diodes, or are there a few different ones? For the electrolytics I was thinking 50v for the 1000uf, 100v for the 100uf, and 63v for the 10uf. Finally, what should I use for the 2W in R2 & R4? Thanks and i'm sorry to even bother you with these questions in the first place. If any of the voltages for the lytics are off please let me know. Later.
- 1N4004 are fine for all diodes
- 50V for all electrolytic are fine
- for 2W use 47R
The 2W resistor(s) don't have any fuse function.
It just drops down the voltage a little bit.
No problem using a wire jumper instead.
Are D-LA2A PCB's still available?sure
Just to make sure: for the FP48PSU I need something like an 40 to 48v AC input right? (or dual 24v)no, for 24V & 48V a single 22V AC is fine (there is a voltage doubler for the 48V)
There's no voltage doubler for the 48v output, correct?
2 kits received with thanks! Looking forward to finding some time to assemble...8)
I would like to order a D LA-2A PCB set and the toroidal shipped to the US. How do I get this done?
Hi
I am interesting D LA-2A,I would like to know much in USD for the PCB+shapping to Taiwan
thanks
Still have you D-LA2A PCB in stock ?Sure (see post one (http://www.groupdiy.com/index.php?topic=39570.0))
If so, I'm interesting for 1. Let me know how to order for 1 PCB, shipping to France.
Still have you D-LA2A PCB in stock ?Sure (see post one (http://www.groupdiy.com/index.php?topic=39570.0))
If so, I'm interesting for 1. Let me know how to order for 1 PCB, shipping to France.
D-LA2A PCB = EUR 25,00
Shipping = EUR 5,50
VAT = 5,80
PayPal EUR 36,30 to sales (at) 51xAudio.com
Make sure your shipping address is included
I would like to order the kit for a complete Dual LA2A. Let me know what you need as well as a price. Shipping to St. Paul Minnesota, USA
How can i order some LA2A PCB's?
I would like more info on the Haufe ST8456, including price and shipping.
was there clips ?no, I never do clips, but:
Both 560 channels appear to work perfectly, both mic and hi-z inputs. Thanks V. for the help on the last bits. They sound great. Very nice definition and presence. I suspect the cost of the Haufe transformers is well justified. ...
...first session with OV560.
Sounds a little like a Chandler Germanium, thick and warm ;D
Yeah, it is the cost for me. I'd love a pair if cost weren't an issue :)totally fine. I just can't make it cheaper.
Yeah, it is the cost for me. I'd love a pair if cost weren't an issue :)
i've emailed you about 2 Haufe ST8456
I now take pre-orders for a one-off run K13117 PCBs (and transformers)
See first post for details
Jensamp 51x discontinued??Yes. Darius only wants to do support a limited time for a limited quantity.
Any plans for a new DAOC run of printed boards?analag asked me to stop selling it / making new runs a few years ago.
cuz it's not sturdy.if you are doing it right it is. my prototype testing adapter is still working fine ...
can you post some pics?
I do want to buy a Haufe ST8456
how can that be arranged?
Charlie/ sweden
You can see some pictures here:
http://www.nrgrecording.de/nrg/viewtopic.php?t=1623&start=15
what does it do?
what does it do?A lot of fun ;)
My guess is that it takes two sets of 8 XLR inputs, routes them through a DB25 connection into the PCB which then allows the relays to switch between the two sets of XLRs (A/B). I'm guessing it then acts as a form of D.I. by balancing the output.Right.
I'd like 1 D-AOC PCB thanks.
email doulos_21(at)yahoo.com for paypal info.
Haufe RK204 transformers are back in stock!hi sorry!! but i need Haufe rk310/09463 for john hardey opamp 990c output transformer
I was wondering if the DLA2A transformer will fit upright in a 2U case... what is the diameter?won't fit in most cases since it is ca 85mm
Hi Volker,Sure. 4 ready to ship.
Do you have any PMV70X full kits left?
Regards,
rjuly
Hi..just joined the forum. Do you have any DLA-2A pcb's available and the 60VA toroidal transformer?
I am based in the U.K.
Thanks !
mmm bc550c ? just as reference isn't?http://groupdiy.com/index.php?topic=36569.msg484228#msg484228
Do you have plans to restock the D-La2a Board?
Hi Volker, What do the PSU660-rev02 look like have got the same layout as before..Hi Skal, they are still the same and nothing changed.
Do you have plans to restock the D-La2a Board?
Yes, with my next PCB order. D-LA2A PCBs should be back in stock in a few weeks.
Is there any possibility that your OV560 or PMV70 kits will ever become available again?Hi Richard,
I don't suppose you have any plans to do part 3 anytime soon... 51 x version of V 476 B ?This won't happen. However, one of my original PMV70 serial number stickers says V 476 A :)
I'm not in any particular hurry, but at some point in the next 12 months or so, I would like to standardize my mic pres to either the OV560 or the PVM70, so buying perhaps eight of them. I would like to ensure that they are as uniform as possible. I already have two of each. In terms of parts availability (transformers, DOAs etc..), which of the two models would be the most practical to plan for?Both use the same input transformer, today still in production.
Also, I would need to get another 51x chassis. Is it possible to upgrade my current power supply to accomodate two chassis?Which power supply do you have? We still use the same schematic for all.
This won't happen. However, one of my original PMV70 serial number stickers says V 476 A :)Fair enough - can't blame a guy for trying... ;-)
Both use the same input transformer, today still in production.To tell the truth, apart from the difference in gain I don't hear much to distinguish between the OV560 and PVM70. It might be nice to have a couple more PVM70s to handle some recording that calls for that extra gain, but mostly I think the OV560s would be fine. If I can find NOS transformers for a couple of channels of PVM70, then the rest could be OV560s. If I get 2 PVM70s and 5 OV560s, along with what I already have, I could fill one 11 space rack.
The OV560s output transformer is still in production, the PMV70X output transformer isn't.
Both use the OA12 DOA, I reverse engineered one and have it now available with original parts 8)
Which power supply do you have? We still use the same schematic for all.I have a fair number of 51x type channels that need 24 volts, so I will need to get a second power supply to support 24 volts comfortably across 2 racks. I am assuming that one power supply can comfortably handle all 11 of the OVF and PVM pres running at 24 volts.
It depends very much on the modules you have installed.
I'd like to order 4 D-LA2A PCBs and 2 bo Hansen DI PCBs.No problem. Please mail your request and location to [email protected]
Any of the DAOC specials left?Yes. Since I was able to obtain some NOS VTL5C4/2 (the last original stock inside the EU as far as I know) I do have some more bundles left.
Hi Volker! Sent you a couple of emails about a 51x Rack...Are you sure? I received nothing.
Are the enclosure for the floor box psu the same as CAPI`s? Do you have a picture?I import the Floor Box metal work from Jeff, they are the same.
How does the 672 compare to the pmv70x?While the PMV70 could be your only pre-amp the V672X has a wide variety of colors with its switchable input impedances.
Hi Silent, I was just wondering if you still have pcb's for the Bo Hansen DI. I was also wondering if any of the psu's you list can be used for 12v?
Is there a build thread for the V672X?
https://groupdiy.com/index.php?topic=66411
Hi Andy, HWBP36 PCBs are already ordered and should be back in stock beginning of April.
I want to build a 51x power supply now my question is can I use 2 toroidal? 1st for +/- 16v it has a 48v tap too 2nd for +/- 24vUsing multiple transformers is no problem.
One transformer is 24-0-24
The second is 17-0-17 and 48-0v
I think is ok then
All PMV70X sold, thank you.
Hey Romp,
PayPal EUR 12,70 to sales[at]51xAudio.com
Make sure your shipping address is visible and correct in your payment.
Thanks,
Volker
Sent! Thanks!Thank you, shipped.
Transformers arrived this weekend. Thanks for the quick ship !Cool. Thanks for letting me know.
Amazing sounding pre...Moshe, for the PMV70X I need to find more NOS or used output transformers, or some time for testing and adapting other transformer models.
Too bad I didn't have sufficient funds to get more than two.
Any chance you're ever gonna make some again?
Cool. Thanks for letting me know.
Moshe, for the PMV70X I need to find more NOS or used output transformers, or some time for testing and adapting other transformer models.
Hi,
Id like to order one of your DI pcb (Bo Hansén Active DI-Box 1975 PCB)
Thanks,
jabali (Valencia, Spain)
Hi jabali,
please send an email to [email protected]
or PayPal EUR 12,14 to [email protected]
Thank you
Volker
Will the Haufe trafos will be back in stock at any point?Yes. They had been scheduled to arrive last week.
How much for the complete compressor kits shipped to the US?One 903-51X full kit with output transformer is EUR 192,00 shipped to the US (trackable, no insurance)