GroupDIY

Project Specific Discussions => Dynamic Processors => Topic started by: TonyW on August 27, 2018, 07:18:13 PM

Title: GSSL BOM
Post by: TonyW on August 27, 2018, 07:18:13 PM
Hi everyone
I am in the process of building the GSSL mix buss compressor. I haven't purchased anything yet, but I created a Mouser BOM spreadsheet from the parts list that Gyraf Audio posted on DIY.     http://www.gyraf.dk/gy_pd/ssl/ssl_complist.htm
I thought it might be helpful to someone else who wants to build one, I will be purchasing the PCB's from PCBG, and the enclosure, and face-plate from Collective Cases, with the Hairball meter option. I notice the SC in and by pass switches on the face plate is a 1/4" dia
So I added a toggle switches for these, but kept the LORIN switch in the BOM
I will also purchase a pair of blank quad vca adapter / DBX202 replacement PCB’s from Serpent audio.
If anyone wants to chime in and double check my list that would be great. Any corrections I could revise my list and re-post

Thanks, Tony Wisniewski