GroupDIY

Project Specific Discussions => Microphones => Topic started by: Recording Engineer on May 24, 2019, 02:21:22 PM

Title: Samar Audio TF08 Percussion Samples
Post by: Recording Engineer on May 24, 2019, 02:21:22 PM
The lastest edition of Chris at Barbaric Amplification and me playing with this Samar TF08 capsule is the 49-circuit without local feedback with a 5840W tube and a Mohawk Studios B5887 6.5:1  “black box” transformer.

These samples are your’s truly working out the rust after not really playing much at all for the past 15-years. Mic was literally thrown up and these are the one and only passes.

On drums, mic at top of kick height, 3ft and 1ft out. Pre is a Shelford and set for nothing but it’s gain.

Files are 24-bit, 48k.

Congas: https://drive.google.com/file/d/1Q4ttbZ_v5bcHe4PtUFc9xI99PCs8v6km/view?usp=sharing
Kick Out 3ft: https://drive.google.com/file/d/1nNE_RBzoyHxX60HGKKqbqadVt5-j73-c/view?usp=sharing
Kick Out 1ft: https://drive.google.com/file/d/1sb-nm5s5eUZVuwh-5crOWWJ5m92EEMcc/view?usp=sharing

Wish I tried as overhead too. Probably next week. Trying for piano samples next week too.
Title: Re: Samar Audio TF08 Percussion Samples
Post by: Recording Engineer on May 24, 2019, 04:29:22 PM
By the way, just saw on FB Samar’s new ribbon mic!:
http://samaraudiodesign.com/AL95.html?fbclid=IwAR3aK0od_OVeIH5vPp9cgybxlo4bn0ivOdJxjNDuW6BZONWKknEMK8V5yrE

Next week, I should put my custom HF-roll-off VL37A on OH and drum room too!