GroupDIY

Project Specific Discussions => Mixers/Monitoring Systems => Topic started by: ilfungo on May 19, 2020, 03:47:33 PM

Title: Amek M2500 fader Vca
Post by: ilfungo on May 19, 2020, 03:47:33 PM
Hi
My amek m2500 have some fader with a plastic element between binary broken....
Attached image.
I've tried to find them and also the entire fader, but out production and seems impossibile to find.
Could someone help me?
There is a new fader that can fit with no modificstion?
The original one are 1110 dn
Thanks
Title: Re: Amek M2500 fader Vca
Post by: ilfungo on May 19, 2020, 03:49:30 PM
This is the original fader
Title: Re: Amek M2500 fader Vca
Post by: jensenmann on May 27, 2020, 05:04:04 PM
A bit late, but did you contact audiomaintenance.com? They used to be P&G service point.
Title: Re: Amek M2500 fader Vca
Post by: ilfungo on May 31, 2020, 06:02:04 PM
Thanks jensenmann
I will try.
I have contacted P&G  in EU
Them told me it's out of production from many years, and the is no substitute with same dimension and spec.
Now I'm tryng to rebuilt it with 3d print....
I'm very near
Title: Re: Amek M2500 fader Vca
Post by: zamproject on June 01, 2020, 05:30:24 AM
Hello

Them told me it's out of production from many years, and the is no substitute with same dimension and spec.

What is so specific with them ? Distance between fixing screw is not 110mm ?
VCA fader have linear taper.

Best
Zam
Title: Re: Amek M2500 fader Vca
Post by: ilfungo on June 01, 2020, 12:57:21 PM
Hi Zam
Fixing screw are not 110 but 140
And there are 2 additional holes to Fix them to  main channel Pcb...
Best