Telef V376

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

synthi

Well-known member
Joined
Jun 9, 2004
Messages
560
Location
Madrid (SPAIN)
My next project will be racking a pair of Telefunken V376 pres.
Unfortunately I don`t have the schemos or pinouts. I`ve found references about the 376s being a kind of 676s, but I think not sharing the same pinout.

The V676s have mic and line inputs but the 376s semms to have mic only inputs.
Does anyone ahve info about them?
I tried kubi site and searching online without sucess...
May be silent arts have them in his pandora´s box HD? :shock:

Thanks in advance!

Synthi.
 
This is all I got, sorry.
I emailed Ollie for the 376 and he said it was a POS, but he would look for the schematic.
Haven't heard from him since.
Been about three months.
cj

v372_d.jpg
 
here's the pin-out:

1/2 in
18 out unbal.
19/20 out bal.
22/23 bridge (out xformer center taps)
29 0v
30 chassis
31 +24v
consumes about 95mA max.

mic inputs only. circuit layout is different from v676.

have fun! :grin:
 
if you are quick - there is a piccie on ebay of the pinouts and a cable...
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=23790&item=3736196989&rd=1
 
[silent:arts],

Is there any chance that you have any info on the Neumann PV-46 cards? I have not been able to find anything on those anywhere..

:razz:

Jakob E.
 
hey jakob,
i got a schem of pv46-d (dual version on one pcb) right here.
not sure if 100% identical (the d version uses the rare neumann oa10 op-amps), but you can pm me and i'll e it to ya.

the practical thing with them is that you can set the gain from 0 to 40db by an external feedback resistor (a little like v672). i have one unit myself and use it as a make-up amp for my passive eckmiller and teldec eq's which have insertion losses of 34 and 12db respectively.
 
Back
Top