starfish
Well-known member
Can I make a passive headphone attenuator just using a dual 10K pot? Or if I've missed this somewhere else, can someone direct me to the link? thanks
Passive Headphone attenuator?
- Thread starter starfish
- Start date
Help Support GroupDIY Audio Forum:
No, most normal pots won't be able to handle the required power.
You could do a stepped-resistor dual rotary switch with ½W resistors - that should work..
Jakob E.
You could do a stepped-resistor dual rotary switch with ½W resistors - that should work..
Jakob E.
