Pin out for EV 666 microphone

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ohhey

Well-known member
Joined
Sep 8, 2005
Messages
92
Location
Fort Worth Texas
I'm making an adapter from the UA-3-11 connector that fits an electrovoice 666 microphone and I know that pins 1 and 2 are the output and 3 is ground but I'm not sure what pin is hot. Is pos preasure on the diaphram at pin 1 or pin 2 of the UA ?

By the way I have no mic to test with right now, that' why I hoped someone here remembered.
 
here is a link to all info on the ev mic. sound be like yours..

http://www.coutant.org/666r/

fig5.gif


looking like pin 1 is hot. pin 2 is cold. and pin 3 ground. I like that better then pin 2 hot. makes perfect sense to me. hot cold ground as we often refer. but anyway. it's pin 1 hot..
cheers,
:guinness:
 
[quote author="pucho812"]here is a link to all info on the ev mic. sound be like yours..

http://www.coutant.org/666r/

fig5.gif


looking like pin 1 is hot. pin 2 is cold. and pin 3 ground. I like that better then pin 2 hot. makes perfect sense to me. hot cold ground as we often refer. but anyway. it's pin 1 hot..
cheers,
:guinness:[/quote]

Thanks, I have that site bookmarked I just forgot about it.
 
Back
Top