Oktava Mods...Damping material?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
A shockmount? :razz:

I read the Dorsey article which mentioned silicone sealant, but that stuff is messy.

I'd probably go for a strong rubber foam myself if I thought it was necessary.
 
thanks...i was kind of under the impression that i could do a litle better with something that would be removable....like felt from a drumstand or something
 
I used the silicone RTV gasket sealer from Autozone. It burns the hell out of your nose, and it isn't as messy as one might think. One word of caution....don't put any gasket glue in the area where the xlr connector comes out of the body because the guts won't fit back in the body.
 
i used spray in undercoating for cars. mask off the areas you don't want hit and spray away. i used many coats and made probably 3/16 thick. works great!
 
Back
Top