acid etching front panel graphics

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
One thing to be carefull with electro-chemical etch. If you're doing a panel that has clear anodize, it may not work. You need to be on bare metal for it to do it's thing.

Here's a link to another board where someone discusses the results he's getting using electrochemical etch of steel. Might be useful to some:

http://www.caswellplating.com/bbs/viewtopic.php?t=1008&highlight=electrochemical

They also talk about the EOM chemicals being dilute HCL.

Regards

ju
 
thanks for the link fum. this is good information and has rekindled my hope for this method. it's funny, i guess there is a forum for just about anything. do we have a front panel graphics META?
 
Here's a couple of pix of a stompbox that I did with Lazertran material:

boost1.jpg


boost6.jpg


regards, Jack
 

Latest posts

Back
Top