Socket for a UTC A10?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Greenie

Well-known member
Joined
Jan 31, 2005
Messages
218
Location
Norway
Hi...

Does anyone know where to get a socket for a UTC A10 to be used in a LA2A clone? I have a Lundahl micpre there at the moment, but will change it to the A10, wich I have.

Best from
Greenie.
 
I don´t think it was meant to be socketed. It´s a solder LUG transformer. Solder the wires direct to the LUGs.
 
Hi..

Nice info. I can see them now. Any knowledge on how the A10 works contra a Lundahl 1758 micpre?

Greenie.
 
here are A-10 and HA- 100 X templates in pdf:
print and compare scale before drilling!

http://vacuumbrain.com/The_Lab/TA/Templates/a10_template.pdf

http://vacuumbrain.com/The_Lab/TA/Templates/ha-100x_template.pdf



There are some close tolerances so you really have your work cut out for you.

jpg:


utc_templates.jpg
 

Latest posts

Back
Top