8 Chnls DIY Tube Mixer question

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
sorry for my dumbness, but it´s still not clear for me yet. Let´s say I want a 16channel mixer with 10k inputs...

So, I will use cathode followers on the front line amps to drive the 10k inputs, or any other line amps...

Should I use a panpot 10 times the input impedance and calculate the summing resistors using this value also?

It would be something like a 100k dual pot for pan and 82k or maybe a little more for the mixer resistors. Based on what you did, it looks ok for me, but please, let me know if I´m thinking the wrong way about it.

Thanks a million, Dave!
 
Back
Top