I found some ready made Gerbers for a Tube Headphone Amp / Preamp
DIY Projekt and I need professional PCB's for it, cause the layout is double sided :sad:
don't know how many there should be made. I need 2 but in my other thread at the Lab somebody also wanted 3-4 boards...
maybe there are others intrested too.
here is the link to the Project if sombody is interested:
http://www.pmillett.com/wheatfield_audio_ha1.htm
I'am located in Austria, so European Companys or DIY'ers who could make the boards would be great.
every help welcome
Nik
DIY Projekt and I need professional PCB's for it, cause the layout is double sided :sad:
don't know how many there should be made. I need 2 but in my other thread at the Lab somebody also wanted 3-4 boards...
maybe there are others intrested too.
here is the link to the Project if sombody is interested:
http://www.pmillett.com/wheatfield_audio_ha1.htm
I'am located in Austria, so European Companys or DIY'ers who could make the boards would be great.
every help welcome
Nik