SSL talkback amp/comp...

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
[quote author="matthias"]@ Fredrik: "TP" means "test point" ....
forget about tp3 and connect tp1 and tp2 together...[/quote]

I see you answered while i was typing. :grin: thanks for the clarification.
 
What about the diodes? The schematic states IS44 but I cant find any info on these even in data sheet catalogs??
 
Just before C10 there are two resistors facing the original mic amps. Can I just replace them with a single 10K resistor if I´m planning to use a single 5532 based line amp or buffer?

Also, what fet was used in this compressor?
 
what happened to this thread?

this could be a really interesting project actually.

this comp sounds brilliant for smashed room drums sounds, pure rock n roll


maybe we should joind this thread with this other one:

http://www.groupdiy.com/index.php?topic=30888.0

 

Latest posts

Back
Top