Hello everyone,
My name is Andy and I'm from Rome, Italy. I have a few V672 type of modules and I would like to build a +24v/+48v PSU to feed them. I found a pdf file while visiting kubarth.com, here's the link:
http://www.vintagedesign.se/diy/psu.pdf
I searched for information on this specific PSU but I couldn't find much. I was wondering if someone else built and uses this PSU with those old German modules. I'm pretty much a beginner, I know how to solder and I can tell an electrolytic capacitor from a ceramic (usually . Is the PCB layout/schematic on the pdf correct or should I change anything?
Thanks a bunch,
Andy
My name is Andy and I'm from Rome, Italy. I have a few V672 type of modules and I would like to build a +24v/+48v PSU to feed them. I found a pdf file while visiting kubarth.com, here's the link:
http://www.vintagedesign.se/diy/psu.pdf
I searched for information on this specific PSU but I couldn't find much. I was wondering if someone else built and uses this PSU with those old German modules. I'm pretty much a beginner, I know how to solder and I can tell an electrolytic capacitor from a ceramic (usually . Is the PCB layout/schematic on the pdf correct or should I change anything?
Thanks a bunch,
Andy