bloo la2a kit and sowter transformers

hello,

i recently asked this question, but i didnt exactly get the answer i needed, so here goes again!

for anyone who did the bloo kit with the sowter transformers, how EXACTLY do the input and output transformers wire into the the compressor. tell me anything you can!

more specifically, the blue and gray wires on the input transformers: i know that they go into the audio circuitry, but how? and, how the yellow and green wires on the output transformer wire into the audio path.

thanks for everything,
danny

Search through the LA-2a thread--several of us used Sowters. I posted a link in there somewhere to photos of my build. They are high res enough for you to make out the wiring in detail.

A P

Doesn't the scematic on Sowter's website have the wires labeled?

http://www.sowter.co.uk/schematics/la2a.jpg

All of the information you require is in that LA2A thread and on Sowter's website. I know because I asked many questions last year and they were all answered and I have a working pair in my rack.

Siegfried