nacho459
Well-known member
On the Gyraf SRPP Pultec schematic, the output cap coming off the ECC88 plate before the output xfmr is labeled as a 4.7mF / 250v poly.
Is this the correct value? Aren?t they usually in the .22mF range?
I ask this because I am getting 80v on the output side of the 4.7mF cap.
Any ideas?
Is this the correct value? Aren?t they usually in the .22mF range?
I ask this because I am getting 80v on the output side of the 4.7mF cap.
Any ideas?