Pultec PEQ with MEQ

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

craigmorris74

Well-known member
GDIY Supporter
Joined
Sep 9, 2005
Messages
865
Location
benton, ky
I am building a PEQ with the mid cut of the MEQ added in, similar to what was discussed in an older thread:
http://www.groupdiy.com/index.php?topic=2534&highlight=pultec+filter

My design is based on this layout from CJ, along with the specific layout from Cayocosta, modified for this project.
http://www.angelfire.com/ky3/craigorris74/meq_peq.jpg

I've reached a dead end, since any audio I pass through increases almost exponentially in strength as from the low to high frequecies, regardless of what knobs or switches are turned.

Would anybody be interested in taking a look at this thing and troubleshooting it for me? I understand the theory of operation of this thing, but figuring out what's wrong is another story altogether. I thought it would be relatively simple, but apparently not.

Any help would be great.

Craig
 

Latest posts

Back
Top