Grrrrr, it's so hard to get those WIMAs in Europe...

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Purusha

Well-known member
Joined
Jan 14, 2006
Messages
1,868
Location
Somewhere on the Planet
I tried at Reichelt. OK they have most of them but they don't sell out of Germany for less then 150? worth of purchase :evil:

And they charge 58? for shipping to foreign coutries, c'mon :cry:

Is there any other place in Germany where I can get all the caps for my Pultec?

Or if someone from Germany is willing to order the WIMAs for me at Reichelt. :roll:
 
http://www.banzaieffects.com/MKS4-c-431.html

http://www.banzaieffects.com/MKS2-5mm-c-429.html

http://www.banzaieffects.com/MKS02-2.5mm-c-430.html

I've just ordered from here, dunno how the prices compare.
 
alo
those wima`s won`t do,unless you bend the legs.
i`m making some pultecs,and i`ve had the same trouble.
i opted for solen,orange drops(715/716/225).
best regards
pedro
 
http://www.conrad.de
(Home > Bauelemente Bausätze > Passive Bauelemente > Kondensatoren >Folien-Kondensatoren)

They have a bunch, cheap
 
alo
to bad one can`t do a pultec with wimas from top to bottom.
the rm in the pultec it`s:7,5mm and 10mm.
if someone can find me a wima 150n with 10mm,tell me.
best regards
pedro
 
[quote author="louder"]alo
to bad one can`t do a pultec with wimas from top to bottom.
the rm in the pultec it`s:7,5mm and 10mm.
if someone can find me a wima 150n with 10mm,tell me.
best regards
pedro[/quote]
I did - if they don't fit - make them fit - extra drill holes - soldered on small bits of wire
Paralleled, serial-ed and soldered underneath the board
 
Hi Purusha,
I live in Germany so it´s no problem for me to buy the stuff you want from Reichelt and send it to you (for les than ? 58,- :wink: ) .
Just drop me a mail!
emre
 
[quote author="veermaster"]Hi Purusha,
I live in Germany so it´s no problem for me to buy the stuff you want from Reichelt and send it to you (for les than ? 58,- :wink: ) .
Just drop me a mail!
emre[/quote]

Thanks. Nice to know. I'll try at Banzai first and if they don't have most of them I will ask you for a favor :thumb: :thumb: :thumb:
 
[quote author="veermaster"]Hi Purusha,
I live in Germany so it´s no problem for me to buy the stuff you want from Reichelt and send it to you (for les than ? 58,- :wink: ) .
Just drop me a mail!
emre[/quote]


Hi, I am trying to contact you. I would really need help to get a few Styroflex caps from Reichelt. I need them fast.

Is there anyone else from Germany who would do me a favor?
 
Back
Top