[tardishead]

I cant find the schematic for the Pultec MEQ-5 EQ amplifier section with the Triad HS50. Has someone got it somewhere?

an I tripping or is the output section a Pultec MB1 mic pre???

[rotation]

This eq was discussed so many times that it's really easy to do sa earch and find schematics.
Good luck!

[dinesh]

HI
Here is Schematics of Pultec MEQ-5 EQ
http://www.gyraf.dk/gy_pd/pultec/meq5.gif

[laitue5]

He?s looking for the amp section.

[MikoKensington]

Well, the filter section has been posted many times.  But the amplifier portion is a little harder to find.  Let me dig around.  I can't promise anything.

[CJ]

I got it.
12 ax into a 6aq5.
hold on...

[Tekay]

Maybe this helps?
http://www.home.earthlink.net/%7Ecayocosta/pultec_eqp1a.htm

[CJ]

ok, 259.7 kb, so watch it!

http://vacuumbrain.com/The_Lab/TA/Pultec/MEQ5/meq_5.jpg

before I learned to use a scanner, no doubt.

cross sectorized coils on the 56, only possible on a 1:1 or other low integer, balanced strays for bandwidth.

[tardishead]

thanks CJ

[ciminosound]

Is that the manual too. I have so much crap I need to scan..... Only the old school guys can give me sh*t bout thaT!

:sam:

ALMOST......no really... :thumb:

[CJ]

where the h have you been?
surfing off the mainland or elsewhere?

Thanks th Greg Boboski for the filter section, never seen a real MEQ 5 filter doc, which is kinda scary, but mine works, so wtf, over?

[tardishead]

Thanks th Greg Boboski for the filter section, never seen a real MEQ 5 filter doc, which is kinda scary, but mine works, so wtf, over?

hey where is that?

[tardishead]

hey guys
I want to build a EQP1A but I want to use the output section of the MEQ5 because I have the transformers for it.
Can I use one output section in the other - does it give about the same makeup gain?

[CJ]

yes, go for it.

no need for a 250 dollah HS 29, my brethren.

[letterbeacon]

CJ (or anyone else that has it) would you mind posting the MEQ-5 amp section schematic again please?

[drask]

Yes, I would like to have it too
It will be great.

Thank's

[QUEEF BAG]

not sure if this is what CJ posted, but it's the same size...

[drask]

not sure if this is what CJ posted, but it's the same size...
[/quote
Thank's for this !
I don't think if it's the same. But CJ can tell us that.

[letterbeacon]

I believe that's the one -thank you very much!

After searching for ages for schematic, giving up and asking for it, I stumble across a second one here: http://www.groupdiy.com/index.php?topic=23004.msg274012#msg274012

It looks to be the same as the one QUEEFBAG posted.

yet another Pultec EQ-MEQ mod question

Started by rlackey The Lab

Pultec PEQ with MEQ

Started by craigmorris74 The Lab

Pultec MEQ-5 relative output level = -3.5dB even in bypass?

Started by OlympicPhil The Lab

Meq-5 full schematic and manual

Started by pucho812 The Lab