help with phantom power for my jh416 console

plateson · Sep 16, 2006

i don't have any phantom power for my mixer. there looks like a space for one to hardwire a power supply to the board to add it, but no way to select which channels would receive it. what do you think would be a workable alternative? maybe an outboard phantom power supply per each condenser mic? if so, which one?

thanks in advance...

Rob Flinn · Sep 17, 2006

The MCI 428 that I maintain has a separate 3rd party manufactured PSU added for phantom. Don't know if this is helpful or not because I've never had a manual to look at when maintaining it, so I'm not sure if it is catered for in the 3 normal supplies.

gyraf · Sep 17, 2006

Shouldn't be a problem to phantom-power all channels simultaneously - our SSL4000 does that. If a mic don't need P48, it'll ignore it.

But then don't patch electronically-balanced line outputs into your mic ins.. Some of the SSM chips, like in TC and such, hates seeing p48.

Jakob E.

help with phantom power for my jh416 console

Help Support GroupDIY Audio Forum:

plateson

Member

Rob Flinn

Well-known member

gyraf

Well-known member

Similar threads

Latest posts

help with phantom power for my jh416 console

Help Support GroupDIY Audio Forum:

plateson

Member

Rob Flinn

Well-known member

gyraf

Well-known member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!