circuit passes signal correcctly after a minute

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

guavatone

Well-known member
Joined
May 21, 2005
Messages
1,608
Location
USA
Can someone help me dignose this. When I pass a signal through my Audix 35102, at fisrt there is no signal then the signal is low and distorted rising in level until it passes fine.

I am thinking this symptom is a bad signal cap since caps are Time related components and there are many signal caps in these. Hopefully it won't be too circuit specific since there tons on components in these boxes. But I did narrow it down to circuits 2, 3, 4, or 5.

BTW This modded DI sounds nice on Bass!
 
Back
Top